How to Set Up a Proxy in GenLogin: Step-by-Step Guide

Connection details

Host: gw.prokso.com
Port: 823 HTTP · 824 SOCKS5 — new IP per request · 10000–20000 sticky session, HTTP(S) and SOCKS5
Username and password: in your dashboard, on the plan page

Your dashboard generates ready-made lines in the format you need: choose the country, IP type and protocol.

Key takeaways

Host gw.prokso.com, ports 823 (HTTP), 824 (SOCKS5), 10000–20000 (sticky sessions, HTTP or SOCKS5)
The username and password are in your dashboard on the plan page
After setup, check your IP on the My IP page

A step-by-step guide to connecting Prokso proxies in GenLogin. It takes a few minutes.

Step 1. Get the proxy details from your dashboard

Open your plan and copy the host gw.prokso.com, port, username and password. Port 823 is HTTP and 824 is SOCKS5 (both give a new IP for every request); ports 10000–20000 keep one IP (sticky session) for up to 120 minutes and work as both HTTP and SOCKS5 (each port is a separate address). Set the country in the username: username__cr.ua.

Step 2. Open the profile network settings

When creating or editing a profile, go to the network section - the proxy and WebRTC settings.

Step 3. Choose the proxy type

Out of Local IP, HTTP Proxy, Socks4 Proxy and Socks5 Proxy, choose HTTP or Socks5. Local IP means working without a proxy.

Step 4. Enter the proxy details

Host: gw.prokso.com, port: a sticky one from 10000-20000, username and password: from your plan in the dashboard. If the program offers to paste a whole line, pick the format it suggests in the generator.

Step 5. Tie time and location to the IP

In the location section keep Timezone based on the external IP and turn on filling in geolocation from the external IP. Set the browser language by hand - the language of the address's country.

Step 6. If the proxy doesn't connect

Check three things: the host gw.prokso.com without extra spaces, a port from 10000-20000, and the type - HTTP or SOCKS5, as selected in the program. A 407 error means a wrong username or password, or the plan has run out of traffic: check the balance on the plan page in the dashboard. A timeout usually means the port was entered with a typo or the program expects a different protocol. And if the address works but the site asks for extra confirmations, check that the profile's time zone and language match the IP country and that the same port is not set in several profiles at once.

Step 7. Check that it works

Open the My IP page: it should show the proxy's IP address and country, not yours. If the connection fails, double-check the port and protocol, and look up error codes on the Error codes page.

FAQ

Which type should I choose: HTTP or Socks5?

Both work with a username and password. If you're not sure what you need, take HTTP - sticky ports 10000-20000 accept either protocol.

Why doesn't the profile time zone match the IP?

Make sure <b>Timezone based on the external IP</b> is selected in the location section rather than a custom time zone. Restart the profile after changing the proxy.

How many profiles can share one port?

Ideally one: on a single port all profiles go out from the same IP, and the platform can link the accounts to each other. The 10000-20000 range has enough ports for thousands of profiles.